| Type: | Capacitive Pressure Sensor |
|---|---|
| Component: | SemiConductor Type |
| For: | Capacitive Pressure Transmitter |
|
Still deciding? Get samples of US$ 1500/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The BC9000 Bus Terminal Controller is a Bus Coupler with integrated PLC functionality and has a fieldbus interface for Ethernet. It is an intelligent slave that can be used as a non-central intelligence in the Ethernet system. One unit consists of the Bus Terminal Controller, any number of terminals between 1 and 64, and a bus end terminal.
The Bus Terminal Controller is programmed using the TwinCAT 2 programming system according to IEC 61131-3. The configuration/programming interface of the BC9000 is used for loading the PLC program. If the software PLC TwinCAT is in use, the PLC program can also be loaded via Ethernet.
In the default setting the inputs and outputs of the connected Bus Terminals are assigned to the controller. Each Bus Terminal can be configured in such a way that it exchanges data directly through the fieldbus with the higher-level automation device.
Controller for distributed signal processing
The BC9000 and BC9050 Bus Terminal Controllers support the operation of all Bus Terminal types. As far as the user is concerned, the inputs and outputs are not handled any differently from the way they are by other coupler series. The information is made available for use as a byte array in the process image of the automation device.
The analog and multi-functional Bus Terminals can be adapted to each specific application using the KS2000 configuration set. Depending on the type, the analog Bus Terminals' registers contain temperature ranges, gain values and linearization characteristics. With the KS2000, the required parameters can be set on a PC. The Bus Terminals store settings permanently and in a fail-safe manner.
Having the controller (PLC, IPC) carry out the configuration of the Bus Terminals is a further option. The PLC or IPC uses function blocks (FB) to take care of the configuration of all the peripherals during the start-up phase. The controller can, if required, upload the non-centrally generated configuration data in order to manage and store them centrally. This means that it is not necessary to carry out the setting procedure again if a Bus Terminal is exchanged. The controller carries out the desired setting automatically after switching on.
MK is a high-tech enterprise which focuses on sales and service for the post-market of imported crushing and hydraulic lubrication systems . The company integrates products design, research and development, OEM product scale storage, technical consulting and on-site service, With deep ploughing industry for many years of accumulated precipitation resources and a strong customer service ability ,we achieve that replace both the wear parts and spare parts undifferentiated of the main imported brand equipment successfully, Thanks to the ultimate pursuit of product quality and the full range of satisfaction for users' efficient and sustainable service requirements. At the same time, Relying on the advanced customer management system, super large spot stocks , the company's service level and capability increase year by year. we get the identify from end users and dealer of the metallurgical mines, sand and stone aggregates, construction waste treatment, energy sources and other fields over the country and abroad ,Both public praise of the enterprise and reputation of brand are famous on the market.
We supply all kinds of OEM aftermarket Bronze Parts and High Manganese Casting Parts for Symons,Sadvik ,Pegson,Telsmith and Nordberg Crushers, the crusher spares fit to your crushers guaranteed.but not limited what we mentioned these as below.
Main Products:
Crusher Bushing,Socket Liner,Piston Step Bearing,Eccentric Bushing,Main Shaft Step Bearing,Crusher Countershafte,Cone Crusher Upper Frame,Bottom Shell Bushing,Top Shell,Bottom Shell,Main Frame ,Adjustment Ring, Head Assy,Bowl,Drive Gear ,Counterweight assy ,Shaft ,Pitman ,Bronze Bushing ,Pump ,Tramp Release Cylinder ,Protection Bushing ,Gear and Gear & Pinion ,Jaw Crusher Fixed Jaw,Movable Jaw,Cone Crusher Mantle,Concave,Bowl Liner.Seals,Spring ,Wedge ,Toggle Plate ,and Etc
){kind=link}