| Material: | HNBR |
|---|---|
| Application: | Lip Base Material Abbreviation |
| Effect: | Fixture&Sealing |
|
Still deciding? Get samples of US$ 497/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
17-107-676-004MK Oil Seal with a MILL-RIGHT™ N lip offers up to 73% improvement in abrasion resistance than standard nitrile seals translating to higher equipment efficiencies, longer bearing life, increased production, and less maintenance.
This seal is a great option for high-speed rotary applications with extreme shaft misalignment. Boasting the industry's highest shaft-to-bore misalignment ratings and one of the fastest shaft speed ratings, the 17-107-676-004 Oil Seal can solve the most difficult bearing protection problems.
Unlike bonded seals where the rubber to metal bond can fail, resulting in leaks and lack of bearing protection, the 17-107-676-004 OIL seal performance is assured with our unique assembled combination of a sealing element, heavy duty metal case, metal filler ring, and brass insert with a special interlocked garter and finger spring.
For longer seal life, choose a MILL-RIGHT™ ES lip for 93% improvement in abrasion resistance compared to standard nitrile seals and 300ºF (150ºC) continuous temperature resistance. Upgrade to a MILL-RIGHT™ V lip for 400ºF (204ºC) continuous operating temperature.
Features and Benefits:
--MILL-RIGHT® sealing elements generate less heat, lower power consumption, improve chemical resistance and extend service life
--Unique design of finger spring mechanically locks the garter spring into place preventing bearing damage from displaced springs
--Finger and garter spring combination reduces leaks caused by high shaft runout by applying consistent lip load around the entire shaft
--The unique design recenters to continue sealing after intermittent runout events
--Heavy duty metal case provides maximum bore retention
--Metal filler ring prevents seal distortion during installation ensuring a true fit in the bore
--Brass insert clamps to the element and the metal filler ring mechanically locks the components into place so that sealing element will not fall out of case with bond failure.
| Bore Size (inch) | 39.500 |
| Bore Size (mm) | 1003.30 |
| Case Material | CRS |
| Configuration Type (Seals) | Single Lip |
| Lip Base Material Abbreviation | NBR |
| Lip Base Material Name | Nitrile |
| Lip Material | MILL-RIGHT N |
| Primary Dimensional Unit of Measure | Imperial |
| Max Shaft Surface Speed (feet/min) | 7000 |
| Max Shaft Surface Speed (meter/sec) | 35.6 |
| Max Temperature (C) | 93 |
| Max Temperature (F) | 200 |
| Misalignment Tolerance (inch) | 0.125 in @ 5,000 ft/min; 0.093 in @ 7,000 ft/min |
| Misalignment Tolerance (mm) | 3.18 mm @ 25.4 m/s; 2.36 mm @ 35.6 m/s |
| Pressure Max (bar) | 0.48 |
| Pressure Max (psi) | 7 |
| Shaft Size (inch) | 37.500 |
| Shaft Size (mm) | 952.50 |
| Shipping Weight | 17.37 lbs |
| Spacers Exist | NO |
| Width (inch) | 0.875 |
| Width (mm) | 22.23 |
){kind=link}